[{"country_short": "USA", "city": "Irvine", "description": "Auto req ID 18868BR\nJob Posting Title Engineer, Principal - Systems Design\nBusiness Unit Mobile and Wireless Group\nJob Description Broadcom is developing solutions supporting the next generation of 3G and 4G high-speed mobile technologies. As part of the CellAirity\u2122 Mobile Platform, Broadcom offers a family of HSDPA (High-Speed Downlink Packet Access), WCDMA (Wideband Code Division Multiple-Access), EDGE (Enhanced Data Rates for GSM Evolution), GPRS (General Packet Radio Services) and GSM (Global System for Mobile Communication) baseband processors for use in cellular handsets, PC cards and other wireless-enabled consumer electronics.\n\nAs wireless handsets and portable media players emerge as the dominant platform for mobile multimedia, Broadcom offers a family of mobile multimedia processors offering the ability to build next generation handheld devices supporting the latest in multimedia applications such as audio and video telephony, messaging, interactive gaming, location-based services and improved Web browsing.\n\nBroadcom is helping to build the next generation of mobile devices through our broad portfolio of industry-leading technologies for Bluetooth\u00ae, Wi-Fi\u00ae, VoIP, FM radio, DVB-H mobile TV, multimedia and other emerging technologies.\n\nIn this role, you will work closely with RFIC design team as a RF System Engineer and you will be responsible for:\n\nRF Transceiver Integration\n- Integrating transmitter and receiver gain control tables\n- Overall system performance from the antenna to the baseband.\n- Using your knowledge knowledge of analog circuits in an RF Transceiver, provide solutions to issues that arise from non-linear systems.\n- Debugging and optimizing RF parameter such as (EVM, ACLR, SNR and BER)\n\nSystem Lineup Analysis\n- Work with ASIC designers to come up with an overall system budget analysis and help drive ASIC specs.\n- Analyze various component specs against system budgets.\n\nRF Platform Front End Engine\n- Overall performance of the RF Engine is the responsibility of the Platform RF Systems Team\n- Work closely with ASIC and HW teams to integrate, optimize and validate the RF parameters in a GSM/UMTS system.\n\nBaseband System Architecture\n- Work with advanced modem team to develop and optimize internal calibrations, algorithms and procedures\n\nFirmware\n- In this role, you will develop algorithms and procedures which will be used directly in Firmware (FW) releases.\n\nFront End Component Specs\n- Meet with perspective Vendors and help drive component specs to meet overall system requirements.\nJob Requirements - BSEE degree and minimum of 12 years related experience; MSEE and a minimum 9 year experience, or Ph.D. and 6 year experience of direct experience related to job description above.\n- Must have 3-5 years of experience with integration and testing of cellular systems.\n- Must have RF System knowledge and be able to generate front end system lineups.\n- Must have hands-on experience with GSM/GPRS/EDGE/ WCDMA/LTE test systems and test methodology. Strong understanding of baseband architecture is a plus\n\nRF System Architecture\n- Solid understanding of RF PLL, LNA, PGA in Direct IQ and Small Signal Polar Architectures\n- Familiar with ADC and DAC implementations and digital algorithms.\n\nFirmware\n- Good understanding of C code\n- Past experience with software development for embedded systems is a plus.\n\nVerilog Knowledge\n- Understanding of Verilog is a plus.\n- Some FPGA development is also a plus.\n\nADS or Simulink (MATLAB) experience\n- Many tasks require analysis done through simulations. Experience in with ADS or MATLAB is a plus.\n\nRF Matching\n- Solid understanding of S-parameters and component matching is expected.\n- Familiar with matching under VSWR conditions is expected.\n\nCharacterization and Debug\n- Must be comfortable in a lab environment\n- Should be able to generate automated scripts using Python or similar tools to help characterize and debug issues.\nCountry United States\nState/Province California\nCity/Town Irvine\nShift 1st Shift - Day\nPercent of Travel Required 5% - 10%\nFunction Engineering\nDiscipline Systems Design", "date_new": "2012-04-24 20:15:17", "url": "http://broadcom.jobs/xml/28151000/job", "country": "United States", "company": "Broadcom", "title": "Engineer, Principal - Systems Design", "reqid": "18868BR", "state": "California", "state_short": "CA", "location": "Irvine, CA", "uid": 28151000}, {"country_short": "USA", "city": "Irvine", "description": "Auto req ID 18870BR\nJob Posting Title Engineer, Principal - Systems Design\nBusiness Unit Mobile and Wireless Group\nJob Description Broadcom is developing solutions supporting the next generation of 3G and 4G high-speed mobile technologies. As part of the CellAirity\u2122 Mobile Platform, Broadcom offers a family of HSDPA (High-Speed Downlink Packet Access), WCDMA (Wideband Code Division Multiple-Access), EDGE (Enhanced Data Rates for GSM Evolution), GPRS (General Packet Radio Services) and GSM (Global System for Mobile Communication) baseband processors for use in cellular handsets, PC cards and other wireless-enabled consumer electronics.\n\nAs wireless handsets and portable media players emerge as the dominant platform for mobile multimedia, Broadcom offers a family of mobile multimedia processors offering the ability to build next generation handheld devices supporting the latest in multimedia applications such as audio and video telephony, messaging, interactive gaming, location-based services and improved Web browsing.\n\nBroadcom is helping to build the next generation of mobile devices through our broad portfolio of industry-leading technologies for Bluetooth\u00ae, Wi-Fi\u00ae, VoIP, FM radio, DVB-H mobile TV, multimedia and other emerging technologies.\n\nIn this role, you will work closely with RFIC design team as a RF System Engineer and you will be responsible for:\n\nRF Transceiver Integration\n- Integrating transmitter and receiver gain control tables\n- Overall system performance from the antenna to the baseband.\n- Using your knowledge knowledge of analog circuits in an RF Transceiver, provide solutions to issues that arise from non-linear systems.\n- Debugging and optimizing RF parameter such as (EVM, ACLR, SNR and BER)\n\nSystem Lineup Analysis\n- Work with ASIC designers to come up with an overall system budget analysis and help drive ASIC specs.\n- Analyze various component specs against system budgets.\n\nRF Platform Front End Engine\n- Overall performance of the RF Engine is the responsibility of the Platform RF Systems Team\n- Work closely with ASIC and HW teams to integrate, optimize and validate the RF parameters in a GSM/UMTS system.\n\nBaseband System Architecture\n- Work with advanced modem team to develop and optimize internal calibrations, algorithms and procedures\n\nFirmware\n- In this role, you will develop algorithms and procedures which will be used directly in Firmware (FW) releases.\n\nFront End Component Specs\n- Meet with perspective Vendors and help drive component specs to meet overall system requirements.\nJob Requirements - BSEE degree and minimum of 12 years related experience; MSEE and a minimum 9 year experience, or Ph.D. and 6 year experience of direct experience related to job description above.\n- Must have 3-5 years of experience with integration and testing of cellular systems.\n- Must have RF System knowledge and be able to generate front end system lineups.\n- Must have hands-on experience with GSM/GPRS/EDGE/ WCDMA/LTE test systems and test methodology. Strong understanding of baseband architecture is a plus\n\nRF System Architecture\n- Solid understanding of RF PLL, LNA, PGA in Direct IQ and Small Signal Polar Architectures\n- Familiar with ADC and DAC implementations and digital algorithms.\n\nFirmware\n- Good understanding of C code\n- Past experience with software development for embedded systems is a plus.\n\nVerilog Knowledge\n- Understanding of Verilog is a plus.\n- Some FPGA development is also a plus.\n\nADS or Simulink (MATLAB) experience\n- Many tasks require analysis done through simulations. Experience in with ADS or MATLAB is a plus.\n\nRF Matching\n- Solid understanding of S-parameters and component matching is expected.\n- Familiar with matching under VSWR conditions is expected.\n\nCharacterization and Debug\n- Must be comfortable in a lab environment\n- Should be able to generate automated scripts using Python or similar tools to help characterize and debug issues.\nCountry United States\nState/Province California\nCity/Town Irvine\nShift 1st Shift - Day\nPercent of Travel Required 5% - 10%\nFunction Engineering\nDiscipline Systems Design", "date_new": "2012-04-24 20:14:16", "url": "http://broadcom.jobs/xml/28150961/job", "country": "United States", "company": "Broadcom", "title": "Engineer, Principal - Systems Design", "reqid": "18870BR", "state": "California", "state_short": "CA", "location": "Irvine, CA", "uid": 28150961}, {"country_short": "USA", "city": "Sunnyvale", "description": "Auto req ID 18533BR\nJob Posting Title Engineer, Principal - Systems Design\nBusiness Unit Mobile and Wireless Group\nJob Description Broadcom is developing next generation Wireless (Wi-Fi) products for consumer electronics, PCs, Access Points and broadband routers. Broadcom\u2019s AirForce family of 802.11a/b/g/n WLAN solutions are enabled across many product platforms. Wi-Fi based products are very rapidly growing, driven by Broadcom\u2019s innovation and technology leadership. We\u2019re looking for energetic, enthusiastic and driven engineers excited about 802.11 wireless networking, network protocols and embedded systems.\n\nIn this position you will work with a team to develop and debug Wireless LAN (WLAN) chips and systems for very high volume mobile and embedded consumer electronics designs. The job spans pre-silicon architecture and HW/SW algorithm design/implementation/test to chip bring-up and characterization. Working with DSP, silicon, and RF designers in Broadcom's market leading WLAN group, you will help realize chip designs for integration into an ever increasing array of mobile and embedded devices.\nJob Requirements Typically requires a BS degree and 12 years of experience in the wireless design field, an MS degree and 9 years of experience in the wireless design field or a PhD and 6 years of experience in the wireless design field\n- Strong programming skills. Knowledge of C, Matlab, Tcl desirable.\n- Understanding of hardware design principles and some HDL (VHDL/Verilog) literacy.\n- DSP experience is desirable.\n- RF experience is desirable.\n- Must have excellent written and oral communication skills.\n- Must have excellent engineering problem solving skills.\n- Must be self motivated and comfortable working independently.\nCountry United States\nState/Province California\nCity/Town Sunnyvale\nShift 1st Shift - Day\nPercent of Travel Required 5% - 10%\nFunction Engineering\nDiscipline Systems Design", "date_new": "2012-04-18 20:05:30", "url": "http://broadcom.jobs/xml/27982121/job", "country": "United States", "company": "Broadcom", "title": "Engineer, Principal - Systems Design", "reqid": "18533BR", "state": "California", "state_short": "CA", "location": "Sunnyvale, CA", "uid": 27982121}, {"country_short": "USA", "city": "San Diego", "description": "Auto req ID 18457BR\nJob Posting Title Multimedia Systems Design & Architecture (Sr. Principal Engineer)\nBusiness Unit Mobile and Wireless Group\nJob Description The candidate should have experience in system and/or architecture in cellular mobile phone, portable or handheld system with emphasis in multimedia and memory architecture. It is required to have technology depth in one or more of the following areas:\n\u2022 Multimedia: 2D/3D Graphics (OpenVG, OpenGL), Video Codec Architecture (H.264, H.265, etc.), Display and Camera subsystems\n\u2022 Memory Controller Technology Basic Knowledge\n\u2022 Software Development, Software and Hardware Interaction\n\u2022 Critical system trade-off understanding, e.g. loading, choice of hardware accelerators, internal vs. external bandwidth optimization, power efficiency, etc.\n\u2022 Software Savvy: C/C++, assembly, RTOS\n\u2022 MIPI Interfaces\n\u2022 Experience in writing system specification\n\u2022 Excellent team collaboration and communications\nExperience and knowledge in some of these areas is also a plus:\n\u2022 Android Architecture and Requirements\n\u2022 System/Subsystem level modeling\n\u2022 System C, Object Oriented Programming\n\nEducation:\nThe candidate should have experience in system and/or architecture in cellular mobile phone, portable or handheld system with emphasis in multimedia and memory architecture. It is required to have technology depth in one or more of the following areas:\n\u2022 Multimedia: 2D/3D Graphics (OpenVG, OpenGL), Video Codec Architecture (H.264, H.265, etc.), Display and Camera subsystems\n\u2022 Memory Controller Technology Basic Knowledge\n\u2022 Software Development, Software and Hardware Interaction\n\u2022 Critical system trade-off understanding, e.g. loading, choice of hardware accelerators, internal vs. external bandwidth optimization, power efficiency, etc.\n\u2022 Software Savvy: C/C++, assembly, RTOS\n\u2022 MIPI Interfaces\n\u2022 Experience in writing system specification\n\u2022 Excellent team collaboration and communications\nExperience and knowledge in some of these areas is also a plus:\n\u2022 Android Architecture and Requirements\n\u2022 System/Subsystem level modeling\n\u2022 System C, Object Oriented Programming\nJob Requirements The candidate should have experience in system and/or architecture in cellular mobile phone, portable or handheld system with emphasis in multimedia and memory architecture. It is required to have technology depth in one or more of the following areas:\n\u2022 Multimedia: 2D/3D Graphics (OpenVG, OpenGL), Video Codec Architecture (H.264, H.265, etc.), Display and Camera subsystems\n\u2022 Memory Controller Technology Basic Knowledge\n\u2022 Software Development, Software and Hardware Interaction\n\u2022 Critical system trade-off understanding, e.g. loading, choice of hardware accelerators, internal vs. external bandwidth optimization, power efficiency, etc.\n\u2022 Software Savvy: C/C++, assembly, RTOS\n\u2022 MIPI Interfaces\n\u2022 Experience in writing system specification\n\u2022 Excellent team collaboration and communications\nExperience and knowledge in some of these areas is also a plus:\n\u2022 Android Architecture and Requirements\n\u2022 System/Subsystem level modeling\n\u2022 System C, Object Oriented Programming\n\nEducation:\nMaster Degree in EE or Computer Science is required\nCountry United States\nState/Province California\nCity/Town San Diego\nShift 1st Shift - Day\nPercent of Travel Required 5% - 10%\nFunction Engineering\nDiscipline Systems Design", "date_new": "2012-03-31 05:49:36", "url": "http://broadcom.jobs/xml/27534523/job", "country": "United States", "company": "Broadcom", "title": "Multimedia Systems Design & Architecture (Sr. Principal Engineer)", "reqid": "18457BR", "state": "California", "state_short": "CA", "location": "San Diego, CA", "uid": 27534523}, {"country_short": "USA", "city": "Sunnyvale", "description": "Auto req ID 18454BR\nJob Posting Title Engineer, Principal - Systems Design\nBusiness Unit Mobile and Wireless Group\nJob Description Broadcom is developing next generation Wireless (Wi-Fi) products for consumer electronics, PCs, Access Points and broadband routers. Broadcom\u2019s AirForce family of 802.11a/b/g/n WLAN solutions are enabled across many product platforms. Wi-Fi based products are very rapidly growing, driven by Broadcom\u2019s innovation and technology leadership. We\u2019re looking for energetic, enthusiastic and driven engineers excited about 802.11 wireless networking, network protocols and embedded systems.\n\nIn this position you will work with a team to develop and debug Wireless LAN (WLAN) chips and systems for very high volume mobile and embedded consumer electronics designs. The job spans pre-silicon architecture and HW/SW algorithm design/implementation/test to chip bring-up and characterization. Working with DSP, silicon, and RF designers in Broadcom's market leading WLAN group, you will help realize chip designs for integration into an ever increasing array of mobile and embedded devices.\nJob Requirements Typically requires a BS degree and 12 years of experience in the wireless design field, an MS degree and 9 years of experience in the wireless design field or a PhD and 6 years of experience in the wireless design field\n- Strong programming skills. Knowledge of C, Matlab, Tcl desirable.\n- Understanding of hardware design principles and some HDL (VHDL/Verilog) literacy.\n- DSP experience is desirable.\n- RF experience is desirable.\n- Must have excellent written and oral communication skills.\n- Must have excellent engineering problem solving skills.\n- Must be self motivated and comfortable working independently.\nCountry United States\nState/Province California\nCity/Town Sunnyvale\nShift 1st Shift - Day\nPercent of Travel Required 5% - 10%\nFunction Engineering\nDiscipline Systems Design", "date_new": "2012-03-29 21:55:07", "url": "http://broadcom.jobs/xml/27496531/job", "country": "United States", "company": "Broadcom", "title": "Engineer, Principal - Systems Design", "reqid": "18454BR", "state": "California", "state_short": "CA", "location": "Sunnyvale, CA", "uid": 27496531}, {"country_short": "USA", "city": "Sunnyvale", "description": "Auto req ID 18083BR\nJob Posting Title Engineer, Principal - Systems Design\nBusiness Unit Mobile and Wireless Group\nJob Description Systems Engineer to design and develop protocol stacks for 4G wireless systems.\n\n- Requirement/Architecture/Design documents for 4G protocol stack\n- Prepare standard contributions\n- Wireless system simulations and performance optimization\n- Integration and Testing of 4G systems\nJob Requirements - Ph.D. or M.S. in Computer Science or Electrical Engineering\n- 10+ years experience in design & development of wireless systems\n- 3+ years in managing wireless system design team\n- Expert in 3G/4G mobile wireless protocols\n- Knowledge of IP networking protocols and wireless standards\n- Excellent written and verbal communication skills\n- Proven people and project management skills\nCountry United States\nState/Province California\nCity/Town Sunnyvale\nShift 1st Shift - Day\nPercent of Travel Required 10% - 25%\nFunction Engineering\nDiscipline Systems Design", "date_new": "2012-03-21 18:17:35", "url": "http://broadcom.jobs/xml/27296674/job", "country": "United States", "company": "Broadcom", "title": "Engineer, Principal - Systems Design", "reqid": "18083BR", "state": "California", "state_short": "CA", "location": "Sunnyvale, CA", "uid": 27296674}, {"country_short": "USA", "city": "Sunnyvale", "description": "Auto req ID 17563BR\nJob Posting Title Engineer, Sr Principal - Systems Design\nBusiness Unit Mobile and Wireless Group\nJob Description You will get to work on very challenging problems in the PHY layer design of 4G modems. The position requires deep thinking, rigor, and a strong background in signal processing and communication theory. Understanding of wireless communication systems, RF electronics, familiarity with RF measurement procedures, and a passion for measuring and analyzing data is a required. You need to know C and Matlab. You might write the occasional modules in which things have to be coded with great precision; one-offs for testing and validation will be more of the norm. This is not a coding job.\n\nIntelligence, creativity, critical thinking skills, independence and excellent communication skills are a must. The successful candidate will develop algorithms and system design specifications and verify the implementation of the same in the lab and in simulation. We are looking for people with a passion for measuring things in the lab, mathematical sophistication, the desire to develop a deep understanding of the LTE standard, and an interest in cross layer design issues.\n\n\nKey Job Responsibilities\n\nTypical tasks include architecting, designing, and documenting bit accurate models of digital signal processing and control algorithms, along with accompanying models of RF and channel impairments. You will work closely with RF systems and RF IC engineers to understand radio requirements, RTL engineers to drive the implementation and verification of new designs, and baseband firmware engineers to support driver development.\n\nSpecifically:\n\nDevelop, implement, and validate signal processing architectures and algorithms for 4G modems.\n\nDevelop a deep understanding of the LTE standard and use it for performance optimization, the design of new features.\n\nConduct rigorous, carefully calibrated, and repeatable measurements and experiments. Analyze these data to developing a deep understanding of what\u2019s happening, interpreting it, and communicating the results clearly.\n\nDevelop test code to exercise the firmware and hardware. These test scripts are used to support experiments and data collection.\n\nDevelop models for RF and mixed-signal paths. Validate system performance using these models along with bit-accurate hardware models using Matlab.\nJob Requirements Qualifications\nA Ph.D. in Electrical Engineering\nStrong aptitude for relating careful RF measurements to signal processing models\nUnderstanding of RF circuitry and impairments\nDepth in signal processing, linear algebra, and wireless communication systems\nProficiency with Matlab. A good understanding of digital design is also a plus.\nCountry United States\nState/Province California\nCity/Town Sunnyvale\nShift 1st Shift - Day\nPercent of Travel Required 10% - 25%\nFunction Engineering\nDiscipline Systems Design", "date_new": "2012-01-28 18:18:13", "url": "http://broadcom.jobs/xml/26173711/job", "country": "United States", "company": "Broadcom", "title": "Engineer, Sr Principal - Systems Design", "reqid": "17563BR", "state": "California", "state_short": "CA", "location": "Sunnyvale, CA", "uid": 26173711}, {"country_short": "USA", "city": "Sunnyvale", "description": "Auto req ID 17564BR\nJob Posting Title Engineer, Principal - Systems Design\nBusiness Unit Mobile and Wireless Group\nJob Description You will get to work on very challenging problems in the PHY layer design of 4G modems. The position requires deep thinking, rigor, and a strong background in signal processing and communication theory. Understanding of wireless communication systems, RF electronics, familiarity with RF measurement procedures, and a passion for measuring and analyzing data is a required. You need to know C and Matlab. You might write the occasional modules in which things have to be coded with great precision; one-offs for testing and validation will be more of the norm. This is not a coding job.\n\nIntelligence, creativity, critical thinking skills, independence and excellent communication skills are a must. The successful candidate will develop algorithms and system design specifications and verify the implementation of the same in the lab and in simulation. We are looking for people with a passion for measuring things in the lab, mathematical sophistication, the desire to develop a deep understanding of the LTE standard, and an interest in cross layer design issues.\n\n\nKey Job Responsibilities\n\nTypical tasks include architecting, designing, and documenting bit accurate models of digital signal processing and control algorithms, along with accompanying models of RF and channel impairments. You will work closely with RF systems and RF IC engineers to understand radio requirements, RTL engineers to drive the implementation and verification of new designs, and baseband firmware engineers to support driver development.\n\nSpecifically:\n\nDevelop, implement, and validate signal processing architectures and algorithms for 4G modems.\n\nDevelop a deep understanding of the LTE standard and use it for performance optimization, the design of new features.\n\nConduct rigorous, carefully calibrated, and repeatable measurements and experiments. Analyze these data to developing a deep understanding of what\u2019s happening, interpreting it, and communicating the results clearly.\n\nDevelop test code to exercise the firmware and hardware. These test scripts are used to support experiments and data collection.\n\nDevelop models for RF and mixed-signal paths. Validate system performance using these models along with bit-accurate hardware models using Matlab.\nJob Requirements Qualifications\nA Ph.D. in Electrical Engineering\nStrong aptitude for relating careful RF measurements to signal processing models\nUnderstanding of RF circuitry and impairments\nDepth in signal processing, linear algebra, and wireless communication systems\nProficiency with Matlab. A good understanding of digital design is also a plus.\n\nCandidate will work to productize advanced Tx features including envelope tracking, digital predistortion, and antenna tuning.\nCountry United States\nState/Province California\nCity/Town Sunnyvale\nShift 1st Shift - Day\nPercent of Travel Required 10% - 25%\nFunction Engineering\nDiscipline Systems Design", "date_new": "2012-01-28 18:17:44", "url": "http://broadcom.jobs/xml/26173710/job", "country": "United States", "company": "Broadcom", "title": "Engineer, Principal - Systems Design", "reqid": "17564BR", "state": "California", "state_short": "CA", "location": "Sunnyvale, CA", "uid": 26173710}, {"country_short": "USA", "city": "Sunnyvale", "description": "Auto req ID 17112BR\nJob Posting Title Engineer, Principal - Systems Design\nBusiness Unit Mobile and Wireless Group\nJob Description Broadcom is developing next generation Wireless (Wi-Fi) products for consumer electronics, PCs, Access Points and broadband routers. Broadcom\u2019s AirForce family of 802.11a/b/g/n WLAN solutions are enabled across many product platforms. Wi-Fi based products are very rapidly growing, driven by Broadcom\u2019s innovation and technology leadership. We\u2019re looking for energetic, enthusiastic and driven engineers excited about 802.11 wireless networking, network protocols and embedded systems.\n\nIn this position you will work with a team to develop and debug Wireless LAN (WLAN) chips and systems for very high volume mobile and embedded consumer electronics designs. The job spans pre-silicon architecture and HW/SW algorithm design/implementation/test to chip bring-up and characterization. Working with DSP, silicon, and RF designers in Broadcom's market leading WLAN group, you will help realize chip designs for integration into an ever increasing array of mobile and embedded devices.\nJob Requirements Typically requires a BS degree and 12 years of experience in the wireless design field, an MS degree and 9 years of experience in the wireless design field or a PhD and 6 years of experience in the wireless design field\n- Strong programming skills. Knowledge of C, Matlab, Tcl desirable.\n- Understanding of hardware design principles and some HDL (VHDL/Verilog) literacy.\n- DSP experience is desirable.\n- RF experience is desirable.\n- Must have excellent written and oral communication skills.\n- Must have excellent engineering problem solving skills.\n- Must be self motivated and comfortable working independently.\nCountry United States\nState/Province California\nCity/Town Sunnyvale\nShift 1st Shift - Day\nPercent of Travel Required 5% - 10%\nFunction Engineering\nDiscipline Systems Design", "date_new": "2012-01-10 20:31:02", "url": "http://broadcom.jobs/xml/25809798/job", "country": "United States", "company": "Broadcom", "title": "Engineer, Principal - Systems Design", "reqid": "17112BR", "state": "California", "state_short": "CA", "location": "Sunnyvale, CA", "uid": 25809798}, {"country_short": "USA", "city": "Sunnyvale", "description": "Auto req ID 17111BR\nJob Posting Title Engineer, Principal - Systems Design\nBusiness Unit Mobile and Wireless Group\nJob Description Broadcom is developing next generation Wireless (Wi-Fi) products for consumer electronics, PCs, Access Points and broadband routers. Broadcom\u2019s AirForce family of 802.11a/b/g/n WLAN solutions are enabled across many product platforms. Wi-Fi based products are very rapidly growing, driven by Broadcom\u2019s innovation and technology leadership. We\u2019re looking for energetic, enthusiastic and driven engineers excited about 802.11 wireless networking, network protocols and embedded systems.\n\nIn this position you will work with a team to develop and debug Wireless LAN (WLAN) chips and systems for very high volume mobile and embedded consumer electronics designs. The job spans pre-silicon architecture and HW/SW algorithm design/implementation/test to chip bring-up and characterization. Working with DSP, silicon, and RF designers in Broadcom's market leading WLAN group, you will help realize chip designs for integration into an ever increasing array of mobile and embedded devices.\nJob Requirements Typically requires a BS degree and 12 years of experience in the wireless design field, an MS degree and 9 years of experience in the wireless design field or a PhD and 6 years of experience in the wireless design field\n- Strong programming skills. Knowledge of C, Matlab, Tcl desirable.\n- Understanding of hardware design principles and some HDL (VHDL/Verilog) literacy.\n- DSP experience is desirable.\n- RF experience is desirable.\n- Must have excellent written and oral communication skills.\n- Must have excellent engineering problem solving skills.\n- Must be self motivated and comfortable working independently.\nCountry United States\nState/Province California\nCity/Town Sunnyvale\nShift 1st Shift - Day\nPercent of Travel Required 5% - 10%\nFunction Engineering\nDiscipline Systems Design", "date_new": "2011-12-20 20:38:48", "url": "http://broadcom.jobs/xml/25480542/job", "country": "United States", "company": "Broadcom", "title": "Engineer, Principal - Systems Design", "reqid": "17111BR", "state": "California", "state_short": "CA", "location": "Sunnyvale, CA", "uid": 25480542}, {"country_short": "USA", "city": "San Diego", "description": "Auto req ID 16814BR\nJob Posting Title Systems Design & Architecture (Sr. Principal Engineer)\nBusiness Unit Mobile and Wireless Group\nJob Description The candidate should have 10+ years of experience in system and/or architecture in cellular mobile phone with emphasis in memory, processor and graphics architecture. Successful candidate shall have experience in defining the overall low power system architecture involving processor, cache, memory partition, internal interconnect, external interfaces and standards, memory interface, graphics processing and overall clocking architecture to generate optimum system power.  System experience including system loading, MIPS analysis, interfaces, bandwidth optimization is also required.\nAs described above, this candidate should have both breadth and depth in system architecture experience. It is required to have some technology depth in the following areas:\n\u2022 Microprocessor, Memory, Cache and Interconnect Architecture and Optimization\n\u2022 Memory Controller Technology Knowledge: LP-DDR2/3, eMMC/MMC/SD, Flash Memory (NOR, NAND), WideIO, UFS, etc.\n\u2022 Graphics Processing Technology\n\u2022 Cellular Connectivity Protocols (USB, MIPI, etc.)\n\u2022 Software and Hardware Interaction\n\u2022 Platform design consideration (interface compatibility and PCB considerations) and peripheral component selection\n\u2022 Overall Platform System Control: Power Up/Down, Clock Distribution and Control\n\u2022 System level modeling\n\u2022 SOC (System-On-Chip) development, focusing on low power optimization\n\u2022 Peripherals involved in the cellular baseband design\n\u2022 Internal SOC system interconnect\n\u2022 Firmware and Hardware Partition\n\u2022 Critical system trade-off understanding, e.g. loading, choice of hardware accelerators, internal vs. external bandwidth optimization, power efficiency, etc.\n\u2022 Experience in writing system specification\n\u2022 Excellent team collaboration and communications\n\nExperience and knowledge in some of these areas is also a plus:\n\u2022 General multimedia knowledge, e.g. video, image processing\n\u2022 RFIC interface and Modem operations\n\u2022 Chip level modeling experience desirable\n\u2022 Audio Processing\n\u2022 Security and DRM\n\nEducation:\nMaster Degree in EE or Computer Science is required\nJob Requirements The candidate should have 10+ years of experience in system and/or architecture in cellular mobile phone with emphasis in memory, processor and graphics architecture. Successful candidate shall have experience in defining the overall low power system architecture involving processor, cache, memory partition, internal interconnect, external interfaces and standards, memory interface, graphics processing and overall clocking architecture to generate optimum system power.  System experience including system loading, MIPS analysis, interfaces, bandwidth optimization is also required.\nAs described above, this candidate should have both breadth and depth in system architecture experience. It is required to have some technology depth in the following areas:\n\u2022 Microprocessor, Memory, Cache and Interconnect Architecture and Optimization\n\u2022 Memory Controller Technology Knowledge: LP-DDR2/3, eMMC/MMC/SD, Flash Memory (NOR, NAND), WideIO, UFS, etc.\n\u2022 Graphics Processing Technology\n\u2022 Cellular Connectivity Protocols (USB, MIPI, etc.)\n\u2022 Software and Hardware Interaction\n\u2022 Platform design consideration (interface compatibility and PCB considerations) and peripheral component selection\n\u2022 Overall Platform System Control: Power Up/Down, Clock Distribution and Control\n\u2022 System level modeling\n\u2022 SOC (System-On-Chip) development, focusing on low power optimization\n\u2022 Peripherals involved in the cellular baseband design\n\u2022 Internal SOC system interconnect\n\u2022 Firmware and Hardware Partition\n\u2022 Critical system trade-off understanding, e.g. loading, choice of hardware accelerators, internal vs. external bandwidth optimization, power efficiency, etc.\n\u2022 Experience in writing system specification\n\u2022 Excellent team collaboration and communications\n\nExperience and knowledge in some of these areas is also a plus:\n\u2022 General multimedia knowledge, e.g. video, image processing\n\u2022 RFIC interface and Modem operations\n\u2022 Chip level modeling experience desirable\n\u2022 Audio Processing\n\u2022 Security and DRM\n\nEducation:\nMaster Degree in EE or Computer Science is required\nCountry United States\nState/Province California\nCity/Town San Diego\nShift 1st Shift - Day\nPercent of Travel Required 5% - 10%\nFunction Engineering\nDiscipline Systems Design", "date_new": "2011-11-29 19:24:09", "url": "http://broadcom.jobs/xml/25089952/job", "country": "United States", "company": "Broadcom", "title": "Systems Design & Architecture (Sr. Principal Engineer)", "reqid": "16814BR", "state": "California", "state_short": "CA", "location": "San Diego, CA", "uid": 25089952}]