Broadcom Jobshttp://broadcom.jobs2012-05-21 14:14:50.317586USAIrvineAuto req ID 18868BR Job Posting Title Engineer, Principal - Systems Design Business Unit Mobile and Wireless Group Job Description Broadcom is developing solutions supporting the next generation of 3G and 4G high-speed mobile technologies. As part of the CellAirity™ Mobile Platform, Broadcom offers a family of HSDPA (High-Speed Downlink Packet Access), WCDMA (Wideband Code Division Multiple-Access), EDGE (Enhanced Data Rates for GSM Evolution), GPRS (General Packet Radio Services) and GSM (Global System for Mobile Communication) baseband processors for use in cellular handsets, PC cards and other wireless-enabled consumer electronics. As wireless handsets and portable media players emerge as the dominant platform for mobile multimedia, Broadcom offers a family of mobile multimedia processors offering the ability to build next generation handheld devices supporting the latest in multimedia applications such as audio and video telephony, messaging, interactive gaming, location-based services and improved Web browsing. Broadcom is helping to build the next generation of mobile devices through our broad portfolio of industry-leading technologies for Bluetooth®, Wi-Fi®, VoIP, FM radio, DVB-H mobile TV, multimedia and other emerging technologies. In this role, you will work closely with RFIC design team as a RF System Engineer and you will be responsible for: RF Transceiver Integration - Integrating transmitter and receiver gain control tables - Overall system performance from the antenna to the baseband. - Using your knowledge knowledge of analog circuits in an RF Transceiver, provide solutions to issues that arise from non-linear systems. - Debugging and optimizing RF parameter such as (EVM, ACLR, SNR and BER) System Lineup Analysis - Work with ASIC designers to come up with an overall system budget analysis and help drive ASIC specs. - Analyze various component specs against system budgets. RF Platform Front End Engine - Overall performance of the RF Engine is the responsibility of the Platform RF Systems Team - Work closely with ASIC and HW teams to integrate, optimize and validate the RF parameters in a GSM/UMTS system. Baseband System Architecture - Work with advanced modem team to develop and optimize internal calibrations, algorithms and procedures Firmware - In this role, you will develop algorithms and procedures which will be used directly in Firmware (FW) releases. Front End Component Specs - Meet with perspective Vendors and help drive component specs to meet overall system requirements. Job Requirements - BSEE degree and minimum of 12 years related experience; MSEE and a minimum 9 year experience, or Ph.D. and 6 year experience of direct experience related to job description above. - Must have 3-5 years of experience with integration and testing of cellular systems. - Must have RF System knowledge and be able to generate front end system lineups. - Must have hands-on experience with GSM/GPRS/EDGE/ WCDMA/LTE test systems and test methodology. Strong understanding of baseband architecture is a plus RF System Architecture - Solid understanding of RF PLL, LNA, PGA in Direct IQ and Small Signal Polar Architectures - Familiar with ADC and DAC implementations and digital algorithms. Firmware - Good understanding of C code - Past experience with software development for embedded systems is a plus. Verilog Knowledge - Understanding of Verilog is a plus. - Some FPGA development is also a plus. ADS or Simulink (MATLAB) experience - Many tasks require analysis done through simulations. Experience in with ADS or MATLAB is a plus. RF Matching - Solid understanding of S-parameters and component matching is expected. - Familiar with matching under VSWR conditions is expected. Characterization and Debug - Must be comfortable in a lab environment - Should be able to generate automated scripts using Python or similar tools to help characterize and debug issues. Country United States State/Province California City/Town Irvine Shift 1st Shift - Day Percent of Travel Required 5% - 10% Function Engineering Discipline Systems Design2012-04-24 20:15:17United StatesBroadcomCalifornia18868BRCAIrvine, CA28151000http://broadcom.jobs/xml/28151000/jobUSAIrvineAuto req ID 18870BR Job Posting Title Engineer, Principal - Systems Design Business Unit Mobile and Wireless Group Job Description Broadcom is developing solutions supporting the next generation of 3G and 4G high-speed mobile technologies. As part of the CellAirity™ Mobile Platform, Broadcom offers a family of HSDPA (High-Speed Downlink Packet Access), WCDMA (Wideband Code Division Multiple-Access), EDGE (Enhanced Data Rates for GSM Evolution), GPRS (General Packet Radio Services) and GSM (Global System for Mobile Communication) baseband processors for use in cellular handsets, PC cards and other wireless-enabled consumer electronics. As wireless handsets and portable media players emerge as the dominant platform for mobile multimedia, Broadcom offers a family of mobile multimedia processors offering the ability to build next generation handheld devices supporting the latest in multimedia applications such as audio and video telephony, messaging, interactive gaming, location-based services and improved Web browsing. Broadcom is helping to build the next generation of mobile devices through our broad portfolio of industry-leading technologies for Bluetooth®, Wi-Fi®, VoIP, FM radio, DVB-H mobile TV, multimedia and other emerging technologies. In this role, you will work closely with RFIC design team as a RF System Engineer and you will be responsible for: RF Transceiver Integration - Integrating transmitter and receiver gain control tables - Overall system performance from the antenna to the baseband. - Using your knowledge knowledge of analog circuits in an RF Transceiver, provide solutions to issues that arise from non-linear systems. - Debugging and optimizing RF parameter such as (EVM, ACLR, SNR and BER) System Lineup Analysis - Work with ASIC designers to come up with an overall system budget analysis and help drive ASIC specs. - Analyze various component specs against system budgets. RF Platform Front End Engine - Overall performance of the RF Engine is the responsibility of the Platform RF Systems Team - Work closely with ASIC and HW teams to integrate, optimize and validate the RF parameters in a GSM/UMTS system. Baseband System Architecture - Work with advanced modem team to develop and optimize internal calibrations, algorithms and procedures Firmware - In this role, you will develop algorithms and procedures which will be used directly in Firmware (FW) releases. Front End Component Specs - Meet with perspective Vendors and help drive component specs to meet overall system requirements. Job Requirements - BSEE degree and minimum of 12 years related experience; MSEE and a minimum 9 year experience, or Ph.D. and 6 year experience of direct experience related to job description above. - Must have 3-5 years of experience with integration and testing of cellular systems. - Must have RF System knowledge and be able to generate front end system lineups. - Must have hands-on experience with GSM/GPRS/EDGE/ WCDMA/LTE test systems and test methodology. Strong understanding of baseband architecture is a plus RF System Architecture - Solid understanding of RF PLL, LNA, PGA in Direct IQ and Small Signal Polar Architectures - Familiar with ADC and DAC implementations and digital algorithms. Firmware - Good understanding of C code - Past experience with software development for embedded systems is a plus. Verilog Knowledge - Understanding of Verilog is a plus. - Some FPGA development is also a plus. ADS or Simulink (MATLAB) experience - Many tasks require analysis done through simulations. Experience in with ADS or MATLAB is a plus. RF Matching - Solid understanding of S-parameters and component matching is expected. - Familiar with matching under VSWR conditions is expected. Characterization and Debug - Must be comfortable in a lab environment - Should be able to generate automated scripts using Python or similar tools to help characterize and debug issues. Country United States State/Province California City/Town Irvine Shift 1st Shift - Day Percent of Travel Required 5% - 10% Function Engineering Discipline Systems Design2012-04-24 20:14:16United StatesBroadcomCalifornia18870BRCAIrvine, CA28150961http://broadcom.jobs/xml/28150961/jobUSASunnyvaleAuto req ID 18533BR Job Posting Title Engineer, Principal - Systems Design Business Unit Mobile and Wireless Group Job Description Broadcom is developing next generation Wireless (Wi-Fi) products for consumer electronics, PCs, Access Points and broadband routers. Broadcom’s AirForce family of 802.11a/b/g/n WLAN solutions are enabled across many product platforms. Wi-Fi based products are very rapidly growing, driven by Broadcom’s innovation and technology leadership. We’re looking for energetic, enthusiastic and driven engineers excited about 802.11 wireless networking, network protocols and embedded systems. In this position you will work with a team to develop and debug Wireless LAN (WLAN) chips and systems for very high volume mobile and embedded consumer electronics designs. The job spans pre-silicon architecture and HW/SW algorithm design/implementation/test to chip bring-up and characterization. Working with DSP, silicon, and RF designers in Broadcom's market leading WLAN group, you will help realize chip designs for integration into an ever increasing array of mobile and embedded devices. Job Requirements Typically requires a BS degree and 12 years of experience in the wireless design field, an MS degree and 9 years of experience in the wireless design field or a PhD and 6 years of experience in the wireless design field - Strong programming skills. Knowledge of C, Matlab, Tcl desirable. - Understanding of hardware design principles and some HDL (VHDL/Verilog) literacy. - DSP experience is desirable. - RF experience is desirable. - Must have excellent written and oral communication skills. - Must have excellent engineering problem solving skills. - Must be self motivated and comfortable working independently. Country United States State/Province California City/Town Sunnyvale Shift 1st Shift - Day Percent of Travel Required 5% - 10% Function Engineering Discipline Systems Design2012-04-18 20:05:30United StatesBroadcomCalifornia18533BRCASunnyvale, CA27982121http://broadcom.jobs/xml/27982121/jobUSASan DiegoAuto req ID 18457BR Job Posting Title Multimedia Systems Design & Architecture (Sr. Principal Engineer) Business Unit Mobile and Wireless Group Job Description The candidate should have experience in system and/or architecture in cellular mobile phone, portable or handheld system with emphasis in multimedia and memory architecture. It is required to have technology depth in one or more of the following areas: • Multimedia: 2D/3D Graphics (OpenVG, OpenGL), Video Codec Architecture (H.264, H.265, etc.), Display and Camera subsystems • Memory Controller Technology Basic Knowledge • Software Development, Software and Hardware Interaction • Critical system trade-off understanding, e.g. loading, choice of hardware accelerators, internal vs. external bandwidth optimization, power efficiency, etc. • Software Savvy: C/C++, assembly, RTOS • MIPI Interfaces • Experience in writing system specification • Excellent team collaboration and communications Experience and knowledge in some of these areas is also a plus: • Android Architecture and Requirements • System/Subsystem level modeling • System C, Object Oriented Programming Education: The candidate should have experience in system and/or architecture in cellular mobile phone, portable or handheld system with emphasis in multimedia and memory architecture. It is required to have technology depth in one or more of the following areas: • Multimedia: 2D/3D Graphics (OpenVG, OpenGL), Video Codec Architecture (H.264, H.265, etc.), Display and Camera subsystems • Memory Controller Technology Basic Knowledge • Software Development, Software and Hardware Interaction • Critical system trade-off understanding, e.g. loading, choice of hardware accelerators, internal vs. external bandwidth optimization, power efficiency, etc. • Software Savvy: C/C++, assembly, RTOS • MIPI Interfaces • Experience in writing system specification • Excellent team collaboration and communications Experience and knowledge in some of these areas is also a plus: • Android Architecture and Requirements • System/Subsystem level modeling • System C, Object Oriented Programming Job Requirements The candidate should have experience in system and/or architecture in cellular mobile phone, portable or handheld system with emphasis in multimedia and memory architecture. It is required to have technology depth in one or more of the following areas: • Multimedia: 2D/3D Graphics (OpenVG, OpenGL), Video Codec Architecture (H.264, H.265, etc.), Display and Camera subsystems • Memory Controller Technology Basic Knowledge • Software Development, Software and Hardware Interaction • Critical system trade-off understanding, e.g. loading, choice of hardware accelerators, internal vs. external bandwidth optimization, power efficiency, etc. • Software Savvy: C/C++, assembly, RTOS • MIPI Interfaces • Experience in writing system specification • Excellent team collaboration and communications Experience and knowledge in some of these areas is also a plus: • Android Architecture and Requirements • System/Subsystem level modeling • System C, Object Oriented Programming Education: Master Degree in EE or Computer Science is required Country United States State/Province California City/Town San Diego Shift 1st Shift - Day Percent of Travel Required 5% - 10% Function Engineering Discipline Systems Design2012-03-31 05:49:36United StatesBroadcomCalifornia18457BRCASan Diego, CA27534523http://broadcom.jobs/xml/27534523/jobUSASunnyvaleAuto req ID 18454BR Job Posting Title Engineer, Principal - Systems Design Business Unit Mobile and Wireless Group Job Description Broadcom is developing next generation Wireless (Wi-Fi) products for consumer electronics, PCs, Access Points and broadband routers. Broadcom’s AirForce family of 802.11a/b/g/n WLAN solutions are enabled across many product platforms. Wi-Fi based products are very rapidly growing, driven by Broadcom’s innovation and technology leadership. We’re looking for energetic, enthusiastic and driven engineers excited about 802.11 wireless networking, network protocols and embedded systems. In this position you will work with a team to develop and debug Wireless LAN (WLAN) chips and systems for very high volume mobile and embedded consumer electronics designs. The job spans pre-silicon architecture and HW/SW algorithm design/implementation/test to chip bring-up and characterization. Working with DSP, silicon, and RF designers in Broadcom's market leading WLAN group, you will help realize chip designs for integration into an ever increasing array of mobile and embedded devices. Job Requirements Typically requires a BS degree and 12 years of experience in the wireless design field, an MS degree and 9 years of experience in the wireless design field or a PhD and 6 years of experience in the wireless design field - Strong programming skills. Knowledge of C, Matlab, Tcl desirable. - Understanding of hardware design principles and some HDL (VHDL/Verilog) literacy. - DSP experience is desirable. - RF experience is desirable. - Must have excellent written and oral communication skills. - Must have excellent engineering problem solving skills. - Must be self motivated and comfortable working independently. Country United States State/Province California City/Town Sunnyvale Shift 1st Shift - Day Percent of Travel Required 5% - 10% Function Engineering Discipline Systems Design2012-03-29 21:55:07United StatesBroadcomCalifornia18454BRCASunnyvale, CA27496531http://broadcom.jobs/xml/27496531/jobUSASunnyvaleAuto req ID 18083BR Job Posting Title Engineer, Principal - Systems Design Business Unit Mobile and Wireless Group Job Description Systems Engineer to design and develop protocol stacks for 4G wireless systems. - Requirement/Architecture/Design documents for 4G protocol stack - Prepare standard contributions - Wireless system simulations and performance optimization - Integration and Testing of 4G systems Job Requirements - Ph.D. or M.S. in Computer Science or Electrical Engineering - 10+ years experience in design & development of wireless systems - 3+ years in managing wireless system design team - Expert in 3G/4G mobile wireless protocols - Knowledge of IP networking protocols and wireless standards - Excellent written and verbal communication skills - Proven people and project management skills Country United States State/Province California City/Town Sunnyvale Shift 1st Shift - Day Percent of Travel Required 10% - 25% Function Engineering Discipline Systems Design2012-03-21 18:17:35United StatesBroadcomCalifornia18083BRCASunnyvale, CA27296674http://broadcom.jobs/xml/27296674/jobUSASunnyvaleAuto req ID 17563BR Job Posting Title Engineer, Sr Principal - Systems Design Business Unit Mobile and Wireless Group Job Description You will get to work on very challenging problems in the PHY layer design of 4G modems. The position requires deep thinking, rigor, and a strong background in signal processing and communication theory. Understanding of wireless communication systems, RF electronics, familiarity with RF measurement procedures, and a passion for measuring and analyzing data is a required. You need to know C and Matlab. You might write the occasional modules in which things have to be coded with great precision; one-offs for testing and validation will be more of the norm. This is not a coding job. Intelligence, creativity, critical thinking skills, independence and excellent communication skills are a must. The successful candidate will develop algorithms and system design specifications and verify the implementation of the same in the lab and in simulation. We are looking for people with a passion for measuring things in the lab, mathematical sophistication, the desire to develop a deep understanding of the LTE standard, and an interest in cross layer design issues. Key Job Responsibilities Typical tasks include architecting, designing, and documenting bit accurate models of digital signal processing and control algorithms, along with accompanying models of RF and channel impairments. You will work closely with RF systems and RF IC engineers to understand radio requirements, RTL engineers to drive the implementation and verification of new designs, and baseband firmware engineers to support driver development. Specifically: Develop, implement, and validate signal processing architectures and algorithms for 4G modems. Develop a deep understanding of the LTE standard and use it for performance optimization, the design of new features. Conduct rigorous, carefully calibrated, and repeatable measurements and experiments. Analyze these data to developing a deep understanding of what’s happening, interpreting it, and communicating the results clearly. Develop test code to exercise the firmware and hardware. These test scripts are used to support experiments and data collection. Develop models for RF and mixed-signal paths. Validate system performance using these models along with bit-accurate hardware models using Matlab. Job Requirements Qualifications A Ph.D. in Electrical Engineering Strong aptitude for relating careful RF measurements to signal processing models Understanding of RF circuitry and impairments Depth in signal processing, linear algebra, and wireless communication systems Proficiency with Matlab. A good understanding of digital design is also a plus. Country United States State/Province California City/Town Sunnyvale Shift 1st Shift - Day Percent of Travel Required 10% - 25% Function Engineering Discipline Systems Design2012-01-28 18:18:13United StatesBroadcomCalifornia17563BRCASunnyvale, CA26173711http://broadcom.jobs/xml/26173711/jobUSASunnyvaleAuto req ID 17564BR Job Posting Title Engineer, Principal - Systems Design Business Unit Mobile and Wireless Group Job Description You will get to work on very challenging problems in the PHY layer design of 4G modems. The position requires deep thinking, rigor, and a strong background in signal processing and communication theory. Understanding of wireless communication systems, RF electronics, familiarity with RF measurement procedures, and a passion for measuring and analyzing data is a required. You need to know C and Matlab. You might write the occasional modules in which things have to be coded with great precision; one-offs for testing and validation will be more of the norm. This is not a coding job. Intelligence, creativity, critical thinking skills, independence and excellent communication skills are a must. The successful candidate will develop algorithms and system design specifications and verify the implementation of the same in the lab and in simulation. We are looking for people with a passion for measuring things in the lab, mathematical sophistication, the desire to develop a deep understanding of the LTE standard, and an interest in cross layer design issues. Key Job Responsibilities Typical tasks include architecting, designing, and documenting bit accurate models of digital signal processing and control algorithms, along with accompanying models of RF and channel impairments. You will work closely with RF systems and RF IC engineers to understand radio requirements, RTL engineers to drive the implementation and verification of new designs, and baseband firmware engineers to support driver development. Specifically: Develop, implement, and validate signal processing architectures and algorithms for 4G modems. Develop a deep understanding of the LTE standard and use it for performance optimization, the design of new features. Conduct rigorous, carefully calibrated, and repeatable measurements and experiments. Analyze these data to developing a deep understanding of what’s happening, interpreting it, and communicating the results clearly. Develop test code to exercise the firmware and hardware. These test scripts are used to support experiments and data collection. Develop models for RF and mixed-signal paths. Validate system performance using these models along with bit-accurate hardware models using Matlab. Job Requirements Qualifications A Ph.D. in Electrical Engineering Strong aptitude for relating careful RF measurements to signal processing models Understanding of RF circuitry and impairments Depth in signal processing, linear algebra, and wireless communication systems Proficiency with Matlab. A good understanding of digital design is also a plus. Candidate will work to productize advanced Tx features including envelope tracking, digital predistortion, and antenna tuning. Country United States State/Province California City/Town Sunnyvale Shift 1st Shift - Day Percent of Travel Required 10% - 25% Function Engineering Discipline Systems Design2012-01-28 18:17:44United StatesBroadcomCalifornia17564BRCASunnyvale, CA26173710http://broadcom.jobs/xml/26173710/jobUSASunnyvaleAuto req ID 17112BR Job Posting Title Engineer, Principal - Systems Design Business Unit Mobile and Wireless Group Job Description Broadcom is developing next generation Wireless (Wi-Fi) products for consumer electronics, PCs, Access Points and broadband routers. Broadcom’s AirForce family of 802.11a/b/g/n WLAN solutions are enabled across many product platforms. Wi-Fi based products are very rapidly growing, driven by Broadcom’s innovation and technology leadership. We’re looking for energetic, enthusiastic and driven engineers excited about 802.11 wireless networking, network protocols and embedded systems. In this position you will work with a team to develop and debug Wireless LAN (WLAN) chips and systems for very high volume mobile and embedded consumer electronics designs. The job spans pre-silicon architecture and HW/SW algorithm design/implementation/test to chip bring-up and characterization. Working with DSP, silicon, and RF designers in Broadcom's market leading WLAN group, you will help realize chip designs for integration into an ever increasing array of mobile and embedded devices. Job Requirements Typically requires a BS degree and 12 years of experience in the wireless design field, an MS degree and 9 years of experience in the wireless design field or a PhD and 6 years of experience in the wireless design field - Strong programming skills. Knowledge of C, Matlab, Tcl desirable. - Understanding of hardware design principles and some HDL (VHDL/Verilog) literacy. - DSP experience is desirable. - RF experience is desirable. - Must have excellent written and oral communication skills. - Must have excellent engineering problem solving skills. - Must be self motivated and comfortable working independently. Country United States State/Province California City/Town Sunnyvale Shift 1st Shift - Day Percent of Travel Required 5% - 10% Function Engineering Discipline Systems Design2012-01-10 20:31:02United StatesBroadcomCalifornia17112BRCASunnyvale, CA25809798http://broadcom.jobs/xml/25809798/jobUSASunnyvaleAuto req ID 17111BR Job Posting Title Engineer, Principal - Systems Design Business Unit Mobile and Wireless Group Job Description Broadcom is developing next generation Wireless (Wi-Fi) products for consumer electronics, PCs, Access Points and broadband routers. Broadcom’s AirForce family of 802.11a/b/g/n WLAN solutions are enabled across many product platforms. Wi-Fi based products are very rapidly growing, driven by Broadcom’s innovation and technology leadership. We’re looking for energetic, enthusiastic and driven engineers excited about 802.11 wireless networking, network protocols and embedded systems. In this position you will work with a team to develop and debug Wireless LAN (WLAN) chips and systems for very high volume mobile and embedded consumer electronics designs. The job spans pre-silicon architecture and HW/SW algorithm design/implementation/test to chip bring-up and characterization. Working with DSP, silicon, and RF designers in Broadcom's market leading WLAN group, you will help realize chip designs for integration into an ever increasing array of mobile and embedded devices. Job Requirements Typically requires a BS degree and 12 years of experience in the wireless design field, an MS degree and 9 years of experience in the wireless design field or a PhD and 6 years of experience in the wireless design field - Strong programming skills. Knowledge of C, Matlab, Tcl desirable. - Understanding of hardware design principles and some HDL (VHDL/Verilog) literacy. - DSP experience is desirable. - RF experience is desirable. - Must have excellent written and oral communication skills. - Must have excellent engineering problem solving skills. - Must be self motivated and comfortable working independently. Country United States State/Province California City/Town Sunnyvale Shift 1st Shift - Day Percent of Travel Required 5% - 10% Function Engineering Discipline Systems Design2011-12-20 20:38:48United StatesBroadcomCalifornia17111BRCASunnyvale, CA25480542http://broadcom.jobs/xml/25480542/jobUSASan DiegoAuto req ID 16814BR Job Posting Title Systems Design & Architecture (Sr. Principal Engineer) Business Unit Mobile and Wireless Group Job Description The candidate should have 10+ years of experience in system and/or architecture in cellular mobile phone with emphasis in memory, processor and graphics architecture. Successful candidate shall have experience in defining the overall low power system architecture involving processor, cache, memory partition, internal interconnect, external interfaces and standards, memory interface, graphics processing and overall clocking architecture to generate optimum system power. System experience including system loading, MIPS analysis, interfaces, bandwidth optimization is also required. As described above, this candidate should have both breadth and depth in system architecture experience. It is required to have some technology depth in the following areas: • Microprocessor, Memory, Cache and Interconnect Architecture and Optimization • Memory Controller Technology Knowledge: LP-DDR2/3, eMMC/MMC/SD, Flash Memory (NOR, NAND), WideIO, UFS, etc. • Graphics Processing Technology • Cellular Connectivity Protocols (USB, MIPI, etc.) • Software and Hardware Interaction • Platform design consideration (interface compatibility and PCB considerations) and peripheral component selection • Overall Platform System Control: Power Up/Down, Clock Distribution and Control • System level modeling • SOC (System-On-Chip) development, focusing on low power optimization • Peripherals involved in the cellular baseband design • Internal SOC system interconnect • Firmware and Hardware Partition • Critical system trade-off understanding, e.g. loading, choice of hardware accelerators, internal vs. external bandwidth optimization, power efficiency, etc. • Experience in writing system specification • Excellent team collaboration and communications Experience and knowledge in some of these areas is also a plus: • General multimedia knowledge, e.g. video, image processing • RFIC interface and Modem operations • Chip level modeling experience desirable • Audio Processing • Security and DRM Education: Master Degree in EE or Computer Science is required Job Requirements The candidate should have 10+ years of experience in system and/or architecture in cellular mobile phone with emphasis in memory, processor and graphics architecture. Successful candidate shall have experience in defining the overall low power system architecture involving processor, cache, memory partition, internal interconnect, external interfaces and standards, memory interface, graphics processing and overall clocking architecture to generate optimum system power. System experience including system loading, MIPS analysis, interfaces, bandwidth optimization is also required. As described above, this candidate should have both breadth and depth in system architecture experience. It is required to have some technology depth in the following areas: • Microprocessor, Memory, Cache and Interconnect Architecture and Optimization • Memory Controller Technology Knowledge: LP-DDR2/3, eMMC/MMC/SD, Flash Memory (NOR, NAND), WideIO, UFS, etc. • Graphics Processing Technology • Cellular Connectivity Protocols (USB, MIPI, etc.) • Software and Hardware Interaction • Platform design consideration (interface compatibility and PCB considerations) and peripheral component selection • Overall Platform System Control: Power Up/Down, Clock Distribution and Control • System level modeling • SOC (System-On-Chip) development, focusing on low power optimization • Peripherals involved in the cellular baseband design • Internal SOC system interconnect • Firmware and Hardware Partition • Critical system trade-off understanding, e.g. loading, choice of hardware accelerators, internal vs. external bandwidth optimization, power efficiency, etc. • Experience in writing system specification • Excellent team collaboration and communications Experience and knowledge in some of these areas is also a plus: • General multimedia knowledge, e.g. video, image processing • RFIC interface and Modem operations • Chip level modeling experience desirable • Audio Processing • Security and DRM Education: Master Degree in EE or Computer Science is required Country United States State/Province California City/Town San Diego Shift 1st Shift - Day Percent of Travel Required 5% - 10% Function Engineering Discipline Systems Design2011-11-29 19:24:09United StatesBroadcomCalifornia16814BRCASan Diego, CA25089952http://broadcom.jobs/xml/25089952/job