Broadcom Jobshttp://broadcom.jobs2012-05-22 22:39:10.770645USAIrvineAuto req ID 19349BR Job Posting Title Engineer, Sr Staff - Hardware Development Business Unit Infrastructure and Networking Job Description Broadcom’s Infrastructure and Networking Group (ING) is looking for a talented Sr. Electrical Engineer to become a key member of our High Speed Controller (HSC) Board Design team. As a team member you will design Test Boards for evaluation of new Broadcom silicon and design volume Production Boards for Consumer and Enterprise markets. The ideal candidate is a good communicator (both verbally and in writing), self-motivated, works well within a team environment, and has +10yrs direct experience implementing board designs from concept to validation, and through production. High speed circuit analysis and trouble-shooting skills are required and familiarity with communication test equipment, IEEE 802.3xx and PCISIG standards, and Regulatory compliance testing is necessary. Also system level thermal and mechanical board analysis/skills are a desirable. Come join Broadcom’s High Speed Board Design team and challenge your skills. Specific candidate qualifications are as defined below. Job Requirements Skills: --Can communicate both verbally and in writing. --Self starter and motivated. --Can take a design from start to finish (design through production). --Experience with volume PCB production design and test. --Can debug/trouble-shoot high speed (gigahertz) circuits. --Compliance experience with Regulatory Agencies (FCC, UL, CSA, CISPR, IEEE, etc..) --Can trouble-shoot and design PCI-E interface. --Can trouble-shoot and design Ethernet 10/100/1G/10G (both copper and fiber). --Exposure to thermal analysis. --Exposure to mechanical analysis. Familiar Tools: --Mentor Graphics 2007 tools --DxDesigner (Mentor Graphics schematic capture tool) --Expedition (PCB Layout tool) --HyperLynx 8.0 (Signal/Power/Impedance/Thermal integrity tool) --Ansoft SIWave --VHDL --Xilinx ISE design tool suite --Ansys Mechanical --Ansoft HFSS --MSOffice Familiar Equipment: --PCs:Servers/Blades/Racks/Desktops/Laptops --Power Supplies/DMMs --Oscilloscopes --Logic Analyzers --Spectral Analyzer --Network Analyzer --SmartBits --IXIA --Rework/Soldering equipment Country United States State/Province California City/Town Irvine Shift 1st Shift - Day Percent of Travel Required 10% - 25% Function Engineering Discipline Hardware Development2012-05-09 20:22:05United StatesBroadcomCalifornia19349BRCAIrvine, CA28580726http://broadcom.jobs/xml/28580726/jobUSAIrvineAuto req ID 18526BR Job Posting Title Engineer, Sr Staff - Hardware Development Business Unit Mobile and Wireless Group Job Description Broadcom is developing solutions supporting the next generation of 3G and 4G high-speed mobile technologies. Broadcom offers a family of LTE, HSDPA (High-Speed Downlink Packet Access), WCDMA (Wideband Code Division Multiple-Access), EDGE (Enhanced Data Rates for GSM Evolution), GPRS (General Packet Radio Services) and GSM (Global System for Mobile Communication) chipsets for use in cellular handsets, PC cards and other wireless-enabled consumer electronics. In this role, you will be responsible for : Job Requirements Qualifications/skills: • Senior level technical experience - 6 years minimum PCB design, with 3 years minimum using one or more of the following tools; Cadence Allegro and Mentor Expedition. • Experience with with the following is required: Blind and buried microvias / high density RF boards / impedance control • IPC Designers Council Certification (C.I.D.) a plus. • Knowledge of IPC specifications and common industry practices is desired. • Good verbal and written communication skills are required. Country United States State/Province California City/Town Irvine Shift 1st Shift - Day Percent of Travel Required 5% - 10% Function Engineering Discipline Hardware Development2012-04-16 22:07:35United StatesBroadcomCalifornia18526BRCAIrvine, CA27932949http://broadcom.jobs/xml/27932949/jobUSAIrvineAuto req ID 18553BR Job Posting Title Engineer, Sr Staff - Hardware Development Business Unit Infrastructure and Networking Job Description • Design, implement, and test hardware reference designs as well as hardware development, validation, and test platforms for PHY networking products including 1GBase-T, 10GBase-T, Automotive, PoE, Optical, and backplane. May support features like EEE, MACSec, 1588, BroadR-Reach, etc. • Assume ownership of the design from concept and requirements collection to finished product, including delivery to internal and external customers. • Design and simulate schematics, oversee and simulate layout, integrate hardware / software, test and debug final platform. • Design and simulated FPGAs for interface, control, traffic generation, and to support new features. • Provide full documentation for requirements, layout hand-off, test configuration, and as needed for status. • Communicate effectively with the internal team, chip groups, device verification team, program management, outside vendors and contractors in various sites and time-zones. • Participate in customer design reviews as needed, utilizing strong communication and documentation skills. • Participate in internal design reviews as needed. Job Requirements • BSEE (MSEE preferred) with at least 6 years of hands-on design experience implementing high speed digital and analog boards • Must have extensive board design experience using OrCAD or Mentor schematic capture and a working knowledge of Allegro or Mentor PCB layout tools. • Must have a strong background in signal integrity and transmission lines including a working knowledge of signal integrity simulation tools and power integrity simulation tools • Must have a strong background in FPGA hardware design, simulation, and implementation using Verilog, VHDL, and Synplify for Xilinx or Altera FPGA design. • Strong communication and documentation skills are required, plus the ability to work successfully in a multi-site, multi-time zone environment. • Must be able to work independently and determine board interface requirements • Must have strong debug and test capability in the lab • Experience with DFT, DFM, and test for EMC is a plus • Experience with Agile is a plus • Some software skills and basic software familiarity is a plus Country United States State/Province California City/Town Irvine Shift 1st Shift - Day Percent of Travel Required 5% - 10% Function Engineering Discipline Hardware Development2012-03-16 19:17:22United StatesBroadcomCalifornia18553BRCAIrvine, CA27207638http://broadcom.jobs/xml/27207638/job